PRODUCT DESCRIPTION
YOU ARE HANDLING REAL FIRE WHEN YOU USE THE
GAMTORCH™! USE CAUTION AT ALL TIMES!
Be aware of automatic fire sprinkler heads that may be in the area. Always be careful not to get flame too close to costumes, scenery, people's hair or other flammable objects. Use the GAMTorch™ only in approved venues where all safety precautions concerning fire are observed, and permits have been obtained (if applicable). Use only where there is proper ventilation and exhaust. The GAMTorch™ is intended for professional use only.
Before using the real flame GAMTorch™, check the
safety release latch to ensure it's working properly.
TO CHECK SAFETY RELEASE LATCH [4]:
Pull down Flame Containment Sleeve [4] and hold
Safety Release Latch [5] over Latch Button [7] on
handle. Fire Chamber [3] should remain in the exposed
position as long as safety release latch is
held. Release Safety Release Latch [5] and observe
that the Flame Containment Sleeve [4] completely
shrouds the Fire Chamber [3] and the Containment
Lid [1] snaps over the top of the Fire Chamber [3].
This action is instant, taking less than one second.
IF SAFETY RELEASE LATCH IS MALFUNCTIONING,
DO NOT USE THE GAMTORCH! CONTACT
GAMPRODUCTS, INC. FOR SERVICE.
Only after checking that the Safety Release Latch [5]
is functioning properly, proceed to load GAMFuel™
pellets into the Fire Chamber [3]. Load one to four
pellets, depending on size of flame and duration
desired. Do not load more pellets than needed. Be
sure to hold down Safety Release Latch [5] while
loading Fire Chamber [3]. After loading Fire Chamber
[3], secure GAMFuel™ pellets with Retaining
Spring [2]. Refer to detail drawing on right. Conceal
the chamber by releasing the Safety Release
Latch [5]. The GAMTorch™ is now loaded and
ready for use.
When you are ready to use the GAMTorch™, slide the
Flame Containment Sleeve [4] down and grip the Safety
Release Latch [5] firmly. Be sure to hold the Safety
Release Latch [5] over Latch Button [7]. Use a lighter or |
